Zica Exam Time Tablepage13



ASTM C150

ASTM C150

...oxide, sulfur trioxide, tricalcium silicate, dicalcium silicate, tricalcium aluminate, and tetracalcium aluminofernite. Applicable properties enumerated in this specification will be determined by the following test methods: air content of mortar, chemical analysis, strength, false set, fineness by air permeability, fineness by turbidimeter, heat of hydration, autoclave expansion, time of...

ASTM D570

ASTM D570

...a function of the square root of immersion time. Time to saturation is strongly dependent on specimen thickness. For example, Table 1 shows the time to approximate time saturation for various thickness of nylon-6. The moisture content of a plastic is very intimately related to such properties as electrical...

ASTM d149

ASTM d149

...order to estimate their significance for a particular material. Three methods for voltage application are specified in Section 12: Method A, Short-Time Test; Method B, Step-by-Step Test; and Method C, Slow Rate-of-Rise Test. Method A is the most commonly-used test for quality-control tests. However, the longer-time tests, Methods B...

ASTM d1238

ASTM d1238

...is found in Appendix X2 and it is a resource to be used to identify sources of test error. 1. Scope 1.1 This test method covers the determination of the rate of extrusion of molten thermoplastic resins using an extrusion plastometer. After a specified preheating time, resin is extruded...

ASTM d 1238

ASTM d 1238

...troubleshooting guide is found in Appendix X2 and it is a resource to be used to identify sources of test error. 1. Scope 1.1 This test method covers the determination of the rate of extrusion of molten thermoplastic resins using an extrusion plastometer. After a specified preheating time, resin...

ASTM D1238

ASTM D1238

...plastometer. After a specified preheating time, resin is extruded through a die with a specified length and orifice diameter under prescribed conditions of temperature, load, and piston position in the barrel. ASTM D1238, Four procedures are described. Comparable results have been obtained by these procedures in interlaboratory round-robin measurements...

FIDIC construction contract mdb harmonised

FIDIC construction contract mdb harmonised

...Records of Contractor’s Personnel and Equipment 6.11 Disorderly Conduct 7 PLANT, MATERIALS AND WORKMANSHIP 7.1 Manner of Execution 7.2 Samples 7.3 Inspection 7.4 Firsting 7.5 Rejection 7.6 Remedial Work 7.7 Ownership of Plant and Materials 7.8 Royalties 8 COMMENCEMENT, DELAYS AND SUSPENSION 8.1 Commencement of Works 8.2 Time for...

ASTM d1894

ASTM d1894

...coefficient of friction is highly dependent on the rate of loading and on the amount of blocking occurring between the loaded sled and the platform due to variation in time before motion is initiated. Care should be exercised to make certain that the speed of response of the recorder,...

ASTM d1785

ASTM d1785

...see Specification D2672 and for details of belled elastomeric joints, see Specifications D3139 and D3212. 2. Referenced Documents (purchase separately) ASTM Standards D618 Practice for Conditioning Plastics for Testing D1598 Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure D1599 Test Method for Resistance to Short-Time Hydraulic...

ASTM d471

ASTM d471

...the data in Specification D5900 to ensure that it is identical to that which appears in Test Method D471. This shall be accomplished at the time of the 5 year review or more frequently when necessary. 1.6 Historical, technical, and background information regarding the conversion from ASTM No. 1,...