Gabay Sa Pagtuturo Ng Filipino Grade 8 Dep Edpage8



ASTM D975

ASTM D975

...No. 1-D S5000; Grade No. 2-D S15; Grade No. 2-D S500; Grade No. 2-D S5000; and Grade No. 4-D. The requirements specified for diesel fuel oils shall be determined in accordance with the following test methods: flash point; cloud point; water and sediment; carbon residue; ash; distillation; viscosity; sulfur;...

ASTM A307-07b

...4 in. The fasteners are designated by “Grade” denoting tensile strength and intended use, as follows: Grade Description Grade A Bolts and studs having a minimum tensile strength of 60 ksi and intended for general applications, Grade B Bolts and studs having a tensile strength of 60 to 100...

ASTM A615-09a

...MPa], and 80 000 , designated as Grade 40 , Grade 60 , Grade 75 , and Grade 80 , respectively. 1.3 Plain bars, in sizes up to and including 2½ in. in diameter in coils or cut lengths, when ordered shall be furnished under this...

ASTM b148

ASTM b148

...Grade F 75.0 2.0 3.0 8.0 . . . 12.0 C95800 . . . . . . 81.3 4.5 4.0 9.0 . . . 1.2 C95820 . . . . . . 79.0 5.2 4.5 9.5 . . . 1.0 C95900 . . . . . . 87.5 ....

ASTM a576

ASTM a576

...0.35 % incl is specified. Such a steel is identified by inserting the letter “L” between the second and third numerals of the grade designation, for example, 10 L 45. A cast or heat analysis is not determinable when lead is added to the ladle stream. F When boron...

ASTM a572

ASTM a572

...Sheet Piling, Zees, and Rolled Tee Thicknesses, in. Maximum Structural Shape Flange or Leg Thickness, in. 42, 50, and 55 ¾ 1.5 60 and 65 ½ 1 TABLE 4 Tensile RequirementsA Grade Yield Point, min Tensile...

ASTM A53

ASTM A53

...of convenient designation, existing in name only, and is used to distinguish it from the actual wall thickness, which may vary over or under the nominal wall thickness. 1.2 This ASTM A53 specification covers the following types and grades: 1.2.1 Type F—Furnace-butt-welded, continuous welded Grade A, 1.2.2 Type E—Electric-resistance-welded,...

ASTM F1554

ASTM F1554

...signs, street lighting and traffic signals, steel bearing plates, and similar applications. Supplementary requirements are included to provide for Grade 55 weldable steel, permanent manufacturers and grade identification, and impact properties for Grades 55 and 105. Zinc coating requirements are included in Section 7 for applications requiring corrosion protection....

ASTM a335

ASTM a335

...similar forming operations, and for fusion welding. Grade P2 and P12 steel pipes shall be made by coarse-grain melting practice. The steel material shall conform to chemical composition, tensile property, and hardness requirements. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be...

ASTM a193

ASTM a193

...for pressure vessels, valves, flanges, and fittings for high temperature or high pressure service, or other special purpose applications. Ferritic steels shall be properly heat treated as best suits the high temperature characteristics of each grade. Immediately after rolling or forging, the bolting material shall be allowed to cool...