Deped Order No 8 Series 2015page17



ASTM F788

ASTM F788

...free download ASTM F788 pdf ASTM F788 STANDARD SPECIFICATION FOR SURFACE DISCONTINUITIES OF BOLTS, SCREWS, AND STUDS, INCH AND METRIC SERIES Revision Edition 08 Chg: Date: 11/01/08 ASTM F788 Document Abstract This ASTM F788 specification establishes allowable limits for the various types of surface discontinuities that may occur during...

ASTM a480

ASTM a480

...of general requirements that, unless otherwise specified in the purchase order or in an individual specification, shall apply to rolled steel plate, sheet, and strip, under each of the following specifications issued by ASTM: Specifications A167, A176, A240/A240M, A263, A264, A265, A666, A693, A793, and A895. 1.2 In the...

ASTM a388

ASTM a388

...of this abstract are accurate, complete or up to date. Significance and Use This practice shall be used when ultrasonic inspection is required by the order or specification for inspection purposes where the acceptance of the forging is based on limitations of the number, amplitude, or location of discontinuities,...

ASTM e112

ASTM e112

...but, as the name suggests, involves comparison of the grain structure to a series of graded images, either in the form of a wall chart, clear plastic overlays, or an eyepiece reticle. There appears to be a general bias in that comparison grain size ratings claim that the grain...

ASTM e112

ASTM e112

...but, as the name suggests, involves comparison of the grain structure to a series of graded images, either in the form of a wall chart, clear plastic overlays, or an eyepiece reticle. There appears to be a general bias in that comparison grain size ratings claim that the grain...

ASTM a350

ASTM a350

...of the manufacturer to obtain the specified requirements. However, Class 3 of Grade LF787 is only available in the quenched-and-precipitation heat treated condition. 1.3 Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified by the purchaser in the order....

ASTM a29

ASTM a29

...date. 1. Scope 1.1 This specification covers a group of common requirements which, unless otherwise specified in the purchase order or in an individual specification, shall apply to carbon and alloy steel bars under each of the following ASTM specifications (or under any other ASTM specification which invokes this...

ASTM a193

ASTM a193

...temperature applications, reference should be made to Specification A320/A320M. 1.4 Nuts for use with bolting are covered in Section 14. 1.5 Supplementary Requirements are provided for use at the option of the purchaser. The supplementary requirements shall apply only when specified in the purchase order or contract. 1.6 This...

ASTM a234 wpb

ASTM a234 wpb

...When desired, one or more of these supplementary requirements may be specified in the order. 1.3 This specification does not cover cast welding fittings or fittings machined from castings. Cast steel welding fittings are governed by Specifications A216/A216M and A217/A217M. 1.4 This specification is expressed in both inch-pound units...

ASTM a351

ASTM a351

...600°F . 1.3 Supplementary requirements of an optional nature are provided for use at the option of the purchaser. The Supplementary requirements shall apply only when specified individually by the purchaser in the purchase order or contract. 1.4 The values stated in either SI units or inch-pound units are...