Deped Order No 8 S 2015



ASTM a992

ASTM a992

...when specified in the purchase order. 1.3 When the steel is to be welded, a welding procedure suitable for the grade of steel and intended use or service is to be utilized. See Appendix X3 of Specification A6/A6M for information on weldability. 1.4 The values stated in either inch-pound...

ASTM e45

ASTM e45

...given lot of steel varies with position, the lot must be statistically sampled in order to assess its inclusion content. The degree of sampling must be adequate for the lot size and its specific characteristics. Materials with very low inclusion contents may be more accurately rated by automatic image...

ASTM a653

ASTM a653

...provide explanatory material. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of this specification. 1.7 Unless the order specifies the “M” designation (SI units), the product shall be furnished to inch-pound units. 1.8 This standard does not purport to address all...

ASTM a403

ASTM a403

...in both inch-pound units and in SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units. 1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text,...

ASTM A694

ASTM A694

...as indicated in Table 1. 1.3 Supplementary Requirements are provided. Supplementary Requirement S 1 is provided for use when purchaser approval is required for repair welding. 1.4 This specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable “M” specification designation...

ASTM a123

ASTM a123

...units, such shall be stated to the galvanizer when the order is placed. 2. Referenced Documents (purchase separately) ASTM Standards A47/A47M Specification for Ferritic Malleable Iron Castings A90/A90M Test Method for Weight of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings A143/A143M Practice for Safeguarding...

ASTM A513

ASTM A513

...from Cold-Rolled Steel outside diameter from ³/8to 12 in. (9.92 to 304.8 mm) wall from 0.022 to 0.134 in. (0.71 to 3.40 mm)   1.4 Optional supplementary requirements are provided and when desired, shall be so stated in the order. 1.5 The values stated in inch-pound units are to...

ASTM a513

ASTM a513

...in. (9.92 to 304.8 mm) wall from 0.022 to 0.134 in. (0.71 to 3.40 mm) 1.4 Optional supplementary requirements are provided and when desired, shall be so stated in the order. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses...

ASTM a536

ASTM a536

...conform to specified tensile requirements such as tensile strength, yield strength, and elongation. When indicated in the contract or purchase order, castings shall also adhere to special requirements like hardness, chemical composition, microstructure, pressure tightness, radiographic soundness, magnetic particle inspection dimensions, and surface finish.   This abstract is a...

ASTM e709

ASTM e709

...performing examinations in accordance with this guide should be qualified and certified in accordance with ASNT Recommended Practice No. SNT-TC-1A, ANSI/ASNT Standard CP-189, NAS 410, or as specified in the contract or purchase order. 1.6 Nondestructive Testing Agency—If a nondestructive testing agency as described in Practice E 543 is...

DepEd Order No. 8, s. 2015 - Department of Education

DO 8, s. 2015 - Policy Guidelines on Classroom Assessment for the K to 12 Basic Education Program. ... Reference: DepEd Order No. 73, s. 2012

DepEd Order No. 8 s. 2015 - Department of Education

Title: E: 1 IssuancesijUippiite cpartmcut of.tif Author: pdalcantara Created Date: 4/1/2015 5:38:02 PM

Deped Order No.8 Series 2015 | Educational Assessment ...

DepEd. Order No. 8 series 2015 Policy Guidelines on Classroom Assessment for the K to 12 Basic Education Program Classroom Assessment is an ongoing

DepED Order No. 8, s. 2015 (Policy Guidelines on Classroom ...

6 Responses to DepED Order No. 8, s. 2015 (Policy Guidelines on Classroom Assessment for the K to 12 Basic Education Program)

K to 12 Grading Sheet Deped Order No. 8 S. 2015 PPT ...

K to 12 Grading Sheet Deped Order No. 8 S. 2015 PPT presentation 1. (Enclosure to DepEd Order No. 8, s. 2015) POLICY GUIDELINES ON CLASSROOM ASSESSMENT FOR THE K TO 12 BASIC EDUCATION PROGRAM (BEP) 2. I. Theoretical Basis Classroom Assessment is a joint process that involves both teachers and learners.

Clarifications to DEPED Order No. 8, s. 2015 - DepEd CDO ...

Memo744s2015-Clarifications to DEPED Order No. 8, s. 2015 Attachments Memo744s2015-Clarifications to DEPED Order No. 8, s. 2015 (489 kB)

DepEd order # 8 , s., 2015 - SlideShare

DepEd order # 8 , s., 2015 1. VIDEO 2. Technology is just a tool. In terms of getting the kids working together and motivating them, the ...

DepEd order # 8 , s., 2015 - Education - DOCUMENTS.MX

DepEd order # 8 , s., 2015 Aug 09, 2015 Education gilda-galangue. 1. VIDEO . 2. Technology is just a tool. ... DepED Order No. 8 s. 2011. DepEd Order 87, s 2012.

DepEd Order 8, s. 2015 - Policy Guidelines on Classroom ...

DepEd Order 8, s. 2015 - Policy Guidelines on Classroom ...

Ppt Deped-order-no-8-s-2015 | Powerpoint Presentations and ...

View and Download PowerPoint Presentations on DEPED ORDER NO 8 S 2015 PPT. Find PowerPoint Presentations and Slides using the power of XPowerPoint.com, find free ...