Ansi Z358 1 2009 Free Copy



ASTM A1011M-09a

...strength steel sheet and strip, in coils and cut lengths.1.2 Hot rolled steel sheet and strip is available in the designations as listed in 4.1.  1.3 This specification is not applicable to the steel covered by Specification A 635/A 635M. 1.4 The values stated in either SI units or...

ASTM D4169-09

...subjecting them to a test plan consisting of a sequence of anticipated hazard elements encountered in various distribution cycles. This practice is not intended to supplant material specifications or existing preshipment test procedures.1.2 Consider the use of Practice D7386 for testing of packages for single parcel shipments. 1.3 The...

ASTM D1557-09

ASTM D1557-09 ASTM D1557-09 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) ASTM International / 01-Oct-2009 / 14 pages Keywords: compaction characteristics; density; impact compaction using modified effort; laboratory tests; modified proctor test; moisture-density curves; soil compaction; Compaction measurement–soils; Density–soil/rock/related...

ASTM A479

...Standards, Vol 02.04. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may...

ASTM B211-03

...aluminum and aluminum-alloy extruded bars, rods, wire, shapes, and tubes; and Specification B 316 for aluminum and aluminum-alloy rivet and cold-heading wire and rods. 1.2 Alloy and temper designations are in accordance with ANSI H35.1.The equivalent UNS alloy designations are those of preceded by A9, for example, A91100 for...

ASTM B221-08

...to either Specification B 210 or B 241/B 241M, as appropriate, for seamless pipe and tube used in fluid-carrying applications involving pressure. 1.2 Alloy and temper designations are in accordance with ANSI H35.1. ASTM B221-08, The equivalent Unified Numbering System alloy designations are those of Table 2 preceded by...

ASTM B211M-03

...for aluminum and aluminum-alloy extruded bars, rods, wire, shapes, and tubes; and Specification B 316M for aluminum and aluminum-alloy rivet and cold-heading wire and rods. 1.2 Alloy and temper designations are in accordance with ANSI H35.1M. The equivalent Unified Numbering System alloy designations are those of preceded by A9,...

ASTM B316M-02

...Specification B 211, and for extruded wire and rod, see Specification B 221. 1.2 Alloy and temper designations are in accordance with ANSI H35.1 . The equivalent Unified Numbering System alloy designations are those of Table 1 preceded by A9, for example, A91100 for aluminum 1100 in accordance with...

ASTM a228

ASTM a228

...ASTM a228 pdf free download ASTM A228 / A228M – 07 Standard Specification for Steel Wire, Music Spring Quality ASTM A228 / A228M Abstract ASTM a228 pdf This specification covers high quality, round, cold-drawn steel music spring quality wire for the manufacture of springs subject to high stresses or...

ASTM d1785

ASTM d1785

...ASTM d1785 pdf free download ASTM D1785 – 12 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 ASTM D1785 Abstract ASTM d1785 pdf This specification covers poly(vinyl chloride) (PVC) plastic pipe, schedules 40, 80, and 120 for use with the distribution of pressurized liquids...

Safety Shower and Eye Wash Guide to ANSI Z358.1-2014

The proper selection, installation and maintenance of safety shower and eye wash units to comply with ANZI Z358.1 2014 Standard. CRITICAL INFORMATION HERE

ANSI / ISEA Z358.1-2014 Compliance Checklist

3 Guardian Equipment 1140 N North Branch St Chicago, IL 60642 312 447 8100 telephone 312 447 8101 facsimile gesafety.com ANSI / ISEA Z358.1 Compliance Checklist

ANSI-American National Standards Institute

American National Standards Institute is a premier source for timely, relevant, actionable information on national, regional, international standards and conformity ...