Ansi A117 1 2012 Accessibility Standards



ASTM e1527-05

ASTM e1527-05

...commercial real estate may necessitate investigation beyond that identified in this practice (see Sections 1.3 and 13).   1.1.1 Recognized Environmental ConditionsIn defining a standard of good commercial and customary practice for conducting an environmental site assessment of a parcel of property, the goal of the processes established by...

ASTM e23

ASTM e23

...brittle fracture accurately. Further information on significance appears in Appendix X1.   1. Scope 1.1 These test methods describe notched-bar impact testing of metallic materials by the Charpy (simple-beam) test and the Izod (cantilever-beam) test. They give the requirements for: test specimens, test procedures, test reports, test machines (see...

ASTM a668

ASTM a668

...any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date. 1. Scope 1.1 This specification covers untreated and heat-treated carbon and alloy steel forgings for general industrial use. Other ASTM specifications for forgings are available for specific...

ASTM d2487

ASTM d2487

...provides a means for evaluating some of those factors. 1. Scope 1.1 This practice describes a system for classifying mineral and organo-mineral soils for engineering purposes based on laboratory determination of particle-size characteristics, liquid limit, and plasticity index and shall be used when precise classification is required. Note 1—Use...

ASTM C150

ASTM C150

...express or implied or make any representation that the contents of this abstract are accurate, complete or up to date. 1. Scope 1.1 This specification covers ten types of portland cement, as follows (see Note 2): 1.1.1 Type I—For use when the special properties specified for any other type...

ASTM A403-09

ASTM A403-09

...included in this specification Grades are designated with a prefix, WP or CR, based on the applicable ASME or MSS dimensional and rating standards, respectively. 1.3 For each of the WP stainless grades, several classes of fittings are covered, to indicate whether seamless or welded construction was utilized. Class...

ASTM D5444-08

ASTM D5444-08

...compliance of the particle size distribution with applicable specifications requirements, and to provide necessary data for control of the production of various aggregates to be used in bituminous mixtures. 1. Scope 1.1 This ASTM D5444-08 test method covers a procedure for determination of the particle size distribution of fine...

ASTM A564M-04 2009

...contain a large amount of ferrite in the microstructure and can have low ductility in forgings and larger diameter bars. Applications should be limited to small diameter bar. 1.4 The values stated in either inch-pound units or SI (metric) units are to be regarded separately as standards; within the...

ASTM D269-97 2006

ASTM D269-97 2006

...and rosin derivatives as described in Terminology The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This ASTM D269-97 2006 standard does not purport to address all of the safety problems, if any, associated with...

ASTM A350-07

ASTM A350-07

...forged fittings and valves intended primarily for low-temperature service and requiring notch toughness testing. They are made to specified dimensions, or to dimensional standards, such as the ASME and API Specifications referenced in Section . Although this ASTM A350-07 specification covers some piping components machined from rolled bar and...

ANSI-American National Standards Institute

American National Standards Institute is a premier source for timely, relevant, actionable information on national, regional, international standards and conformity ...

ICC A117.1-2017 Accessible and Usable Buildings and Facilities

ISBN: 978-1-60983-701-3 Publisher: ICC Pages: 200; For new buildings and additions, enhanced dimensions for the clear floor space, turning space and the accessible route.

ANSI WebStore - American National Standards

Download international and US standards from the full collections of ISO and IEC standards, American National Standards and thousands of regional and foreign standards

Accessibility Requirements and the Uniform Construction ...

featuring the : ICC International Building Code/2009 ICC/ANSI A117.1‐2003 Accessible and Usable Buildings and Facilities 2010 ADA Standards for ...

ANSI: American National Standards Institute

american national standards other industries several different developing organizations except safety health.

ICC A117.1-2009 Accessible and Usable Buildings and Facilities

Front Matter (Title Page, TOC, and Forward) Sample Pages. The specifications in this standard make sites, facilities, buildings and elements accessible to and usable ...

Major changes/additions from ICC ANSI A117.1 2003 found in ...

Major changes/additions from ICC ANSI A117.1 – 2003 found in the 2009 edition of A117.1 2 ICC ANSI A117.1 – 2009 Section ICC ANSI A117.1 – 2009 Language Type of

ANSI A117.1 2003. Section 604. Ambulatory Accessible ...

1 ANSI A117.1 2003. Section 604. Ambulatory Accessible Compartments. 2005 CSBC. 1109.2.2 Water closet compartment. Where water closet compartments are provided in a ...

Single Use Toilet Rooms – Accessibility Services

by Jennifer Perry. Single Use Toilet Rooms – sometimes referred to as Unisex Toilet Rooms – are scoped in the Revised ADA/ABA Accessibility Guidelines ...

DHS: Codes, Standards and other Rules - IN.gov

675 IAC 13-1: Fire and Building Safety Standards (See NFPA list below) 675 IAC 13-2.3: Indiana Building Code, 1998 Edition (1997 UBC, Vol. 1, 2 and 3) CABO/ANSI A117 ...