Ansi A117 1 2012 Accessibility Standards



ASTM a743

ASTM a743

...contents of this abstract are accurate, complete or up to date. 1. Scope 1.1 This specification covers iron-chromium and iron-chromium-nickel alloy castings for general corrosion-resistant application. The grades covered by this specification represent types of alloy castings suitable for broad ranges of application which are intended for a wide...

ASTM d2487

ASTM d2487

...provides a means for evaluating some of those factors. 1. Scope 1.1 This practice describes a system for classifying mineral and organo-mineral soils for engineering purposes based on laboratory determination of particle-size characteristics, liquid limit, and plasticity index and shall be used when precise classification is required. Note 1—Use...

ASTM b16

ASTM b16

...of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date. 1. Scope 1.1 This...

ASTM c109

ASTM c109

...hydraulic cement and other mortars and results may be used to determine compliance with specifications. Further, this test method is referenced by numerous other specifications and test methods. Caution must be exercised in using the results of this test method to predict the strength of concretes.   1. Scope...

ASTM d 3359

ASTM d 3359

...substrates (for example, wood and plaster). Precision and bias data on the later is lacking. Test Methods D 3359 was developed with metal as the substrate and, in the absense of supporting precision and bias data, is so limited. 1.2 Test Method A is primarily intended for use at...

ASTM d6751

ASTM d6751

...use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date. 1. Scope 1.1 This specification covers biodiesel (B100) Grades S15 and S500 for use as a blend component with middle...

ASTM c94

ASTM c94

...to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date. 1. Scope 1.1 This specification covers ready-mixed concrete as defined in 3.2.2. Requirements for quality of concrete...

ASTM d 445

ASTM d 445

...pavement surfaces are to be made within the same test program. 1. Scope 1.1 This test method covers the measurement of stopping distance on paved surfaces with a passenger vehicle equipped with specified full-scale automobile tires. 1.2 This test method utilizes a measurement of stopping distances representing the non-steady...

ASTM d 1557

ASTM d 1557

...with Practice D3740 does not in itself assure reliable results. Reliable results depend on many factors; Practice D3740 provides a means of evaluating some of those factors. 1. Scope 1.1 These test methods cover laboratory compaction methods used to determine the relationship between molding water content and dry unit...

ASTM c136

ASTM c136

...determination of material finer than the 75-μm (No. 200) sieve cannot be achieved by use of this test method alone. Test Method C 117 for material finer than 75-μm sieve by washing should be employed. Refer to methods of sampling and testing in Specification C 637 for heavyweight aggregates....

The 2010 ADA Standard for Accessible Design/2012 ...

2010 ADA/2012 IBC/2009 ICC A117.1 Comparison Page 1 of 330 The 2010 ADA Standard for Accessible Design/2012 International Build-ing Code with 2009 ICC A117.1 ...

ANSI-American National Standards Institute

American National Standards Institute is a premier source for timely, relevant, actionable information on national, regional, international standards and conformity ...

ANSI WebStore - American National Standards

On the webstore, you can obtain U.S. and international standards… Search for standards from ANSI, ISO, IEC, ASTM and other standards publishers by keyword or ...

ICC A117.1-2009 Standard and Commentary: Accessible and ...

Store > ICC A117.1-2009 Standard and Commentary: Accessible and Usable Buildings and Facilities

ICC A117.1 Accessible and Usable Buildings and Facilities

Front Matter (Title Page, TOC, and Forward) Sample Pages. The specifications in this standard make sites, facilities, buildings and elements accessible to and usable ...

Free PDFs - International Building Code, ADA and More!

Free! and all in one place; a list of PDFs for popular building codes & accessibility standards; 2015 IBC, 2013 CBC, NFPA 101, ADA, FHA, ANSI A117.1 & more!

2012 MINIMUM CONSTRUCTION/REHABILITATION STANDARDS

2012 MINIMUM CONSTRUCTION/REHABILITATION STANDARDS DELAWARE STATE HOUSING AUTHORITY LOW INCOME HOUSING TAX CREDIT PROGRAM 2012 Minimum Construction/Rehabilitation ...

MADCAD.com - The Cloud-Based Reference Library

ERRATA SHEET FOR 2013 SUPPLEMENT TO ANSI/ASHRAE/USGBC/IES STANDARD 189.1-2011 Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential ...

MADCAD.com - The Cloud-Based Reference Library

ANSI/RESNET/ICC 301-2014: Standard for the Calculation and Labeling of the Energy Performance of Low-Rise Residential Buildings using an Energy Rating Index ...

Home | ICC premiumACCESS

Annotate. Annotate code sections with your notes, files or images for easy reference.