ASTM A694 pdf free download

ASTM A694 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
ASTM International / 01-Oct-2008 / 3 pages ASTM A694 pdf

1.1 This ASTM A694 specification covers forged or rolled steel pipe flanges, forged fittings, valves, and parts suitable for use with high-strength transmission-service pipe. Included are flanges, fittings, and similar parts ordered either to dimensions specified by the purchaser or to ASME or MSS dimensional standards referenced in Section 2.

1.2 Several grades of material, based on minimum yield strength requirements, are covered, as indicated in Table 1.

1.3 Supplementary Requirements are provided. Supplementary Requirement S 1 is provided for use when purchaser approval is required for repair welding.

1.4 This specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units.

1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. ASTM A694-08, Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.

TABLE 1 Tensile Requirements

Grade Yield Strength (0.2 % Offset), min, ksi [MPa] Tensile Strength,
min, ksi [MPa]
Elongation in 2 in. or 50 mm, min %
F42 42 [290] 60 [415] 20
F46 46 [315] 60 [415] 20
F48 48 [330] 62 [425] 20
F50 50 [345] 64 [440] 20
F52 52 [360] 66 [455] 20
F56 56 [385] 68 [470] 20
F60 60 [415] 75 [515] 20
F65 65 [450] 77 [530] 20
F70 70 [485] 82 [565] 18

Keywords ASTM A694: high strength low alloy steel; pipe fittings, steel; piping applications; pressure containing parts; steel flanges; steel forgings, alloy; steel forgings, carbon; steel valves; Alloy steel forgings–specifications; Carbon steel forgings–specifications; High pressure service applications–specifications; High-temperature service applications–steel forgings; Steel fittings–specifications; Steel flanges–specifications; Steel valves–specifications ; ICS Number Code 77.140.85 (Iron and steel forgings)

File Type Download : PDF File, ASTM A694

ASTM E 330 Free Download, Difference between A105 and A694 Flanges, ASTM a694 F52 Mechanical Properties, astm a694 free download, astm a694 f52 material specification modulus of elasticity, astm a694 f52 creep data, ASTM A 694 F52 MECHANICAL PROPERTIES, a694-f52 equivalent, WHAT IS THE DIFFERENCE BETWEEN ASTM F-60 FLANGES AND A105 FLANGES, A694 pdf