ASTM A350-07

ASTM A350-07

ASTM A350-07 pdf free download

ASTM A350-07 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM International / 01-Nov-2007 / 8 pages ASTM A350-07 pdf

1.1 This ASTM A350-07 specification covers several grades of carbon and low-alloy steel forged or ring-rolled flanges, forged fittings and valves intended primarily for low-temperature service and requiring notch toughness testing. They are made to specified dimensions, or to dimensional standards, such as the ASME and API Specifications referenced in Section .

Although this ASTM A350-07 specification covers some piping components machined from rolled bar and seamless tubular materials (see ), it does not cover raw material produced in these product forms.1.2 No limitation on size is intended beyond the ability of the manufacturer to obtain the specified requirements. However, Class 3 of Grade LF787 is only available in the quenched-and-precipitation heat treated condition.

1.3 Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified by the purchaser in the order.

1.4 This ASTM A350-07 specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units.

1.5 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. Note 1Refer to Test Methods and Definitions A 370 for notes on significance of notched-bar impact testing.

Keywords ASTM A350-07: carbon equivalent; pipe fittings, steel; piping applications; pressure containing parts; steel flanges; steel forgings, alloy; steel forgings, carbon; steel valves; temperature service applications, low; ICS Number Code 23.040.40 (Metal fittings)

File Type Download : PDF File, ASTM A350-07



ansi b16 5 class 150 astm a350 LF2 class 1, a-350 lf-2 and lf-3, A350 LF2 Material Specification, A350 VS A105N, astm a420 vs a350, a105 vs lf2, a105 vs a350 lf2, astm a350 vs a105, a350 lf6 class 1 and 2 difference, astm a350 lf6 class 2