ASTM A126 – 04(2009) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
Abstract ASTM a126 pdf
This guide covers standard specification for three classes of gray iron for castings intended for use as valve pressure retaining parts, pipe fittings, and flanges. Chemical analysis shall be performed in each lot and shall conform to the required chemical composition for phosphorous and sulfur. Tension test shall be conducted on each class of gray iron castings and shall conform to the specified values of tensile strength. Tension test specimens shall have threaded ends and shall conform to the prescribed dimensions.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1.1 This specification covers three classes of gray iron for castings intended for use as valve pressure retaining parts, pipe fittings, and flanges.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Note 1—The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
2. Referenced Documents (purchase separately)
A48/A48M Specification for Gray Iron Castings
A644 Terminology Relating to Iron Castings
E8 Test Methods for Tension Testing of Metallic Materials
gray iron castings; pressure retaining parts; Flanges/fittings/valves/parts–specifications; Gray iron castings–specifications; Iron pipe/fittings–specifications; Valves;