ASTM A269-08
ASTM A269-08 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service ASTM International / 01-Mar-2008 / 7 pages ASTM A269-08 1.1 This ASTM A269-08 specification covers grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and low- or high-temperature service, as designated in Table 1.1.2 The tubing sizes and thicknesses usually furnished to this specification are ¼ in. (6.4 mm) in inside diameter and larger and 0.020 in. (0.51 mm) in nominal wall-thickness and heavier. 1.3… Download
ASTM B584-08
ASTM B584-08 Standard Specification for Copper Alloy Sand Castings for General Applications ASTM International / 01-Apr-2008 / 6 pages ASTM B584-08 This ASTM B584-08 specification covers requirements for copper alloy sand castings for general applications. ASTM B584-08, Nominal compositions of the alloys defined by this specification are shown in Table 1. This is a composite specification replacing former documents as shown in Table 1.Note 1 – Other copper alloy castings are included in the following ASTM specifications: ASTM B 22, ASTM B 61, ASTM B… Download
ASTM A276-08a
ASTM A276-08a Standard Specification for Stainless Steel Bars and Shapes ASTM International / 01-Oct-2008 / 7 pages ASTM A276-08a 1.1 This ASTM A276-08a specification covers hot-finished or cold-finished bars except bars for reforging (Note 1). It includes rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels. The free-machining types (Note 2) for general corrosion resistance and high-temperature service are covered in a separate specification.Note 1… Download
ASTM D1003
ASTM D1003 STANDARD TEST METHOD FOR HAZE AND LUMINOUS TRANSMITTANCE OF TRANSPARENT PLASTICS Revision / Edition: 07 Chg: Date: 11/01/07 ASTM D1003 Document Abstract This ASTM D1003 test method covers the evaluation of specific light-transmitting and wide-angle-light-scattering properties of planar sections of materials such as essentially transparent plastic. Two procedures are provided for the measurement of luminous transmittance and haze. Procedure A uses a hazemeter as described in Section 5 and Procedure B uses a spectrophotometer as described in Section… Download
ASTM D570
ASTM D570 STANDARD TEST METHOD FOR WATER ABSORPTION OF PLASTICS Revision Edition 98 Chg: W/ REAP Date: 00/00/05 ASTM D570 Document Abstract This ASTM D570 test method covers the determination of the relative rate of absorption of water by plastics when immersed. This ASTM D570 test method is intended to apply to the testing of all types of plastics, including cast, hot-molded, and cold-molded resinous products, and both homogeneous and laminated plastics in rod and tube form and in sheets 0.13… Download
ASTM D2950M-11
ASTM D2950M-11 Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods ASTM International / 01-Dec-2011 / 5 pages ASTM D2950M-11 The test method described is useful as a rapid, nondestructive technique for determining the in-place density of compacted bituminous mixtures. With proper calibration and confirmation testing, the test method is suitable for quality control and acceptance testing of compacted bituminous concrete. The test method can be used to establish the proper rolling effort and pattern to achieve the… Download
ASTM F316-03
ASTM F316-03 Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test ASTM International / 10-Jan-2003 / 7 pages ASTM F316-03 1.1 These test methods cover the determination of two of the pore size properties of membrane filters with maximum pore sizes from 0.1 to 15.0 m. 1.2 ASTM F316-03 Test Method A presents a test method for measuring the maximum limiting pore diameter of nonfibrous membranes. The limiting diameter is the diameter… Download
ASTM E94
ASTM E94 STANDARD GUIDE FOR RADIOGRAPHIC EXAMINATION Revision Edition 04 Chg: Date: 01/01/04 ASTM E94 Document Abstract This ASTM E94 guide (Footnote 2) covers satisfactory X-ray and gamma-ray radiographic examination as applied to industrial radiographic film recording. ASTM E94, It includes statements about preferred practice without discussing the technical background which justifies the preference. A bibliography of several textbooks and standard documents of other societies is included for additional information on the subject. This ASTM E94 guide covers types of materials… Download
ASTM B150-B150M
ASTM B150-B015M STANDARD SPECIFICATION FOR ALUMINUM BRONZE ROD, BAR, AND SHAPES Revision Edition 08 Chg: Date: 04/15/08 ASTM B150-B150M Document Abstract This ASTM B150-B150M STANDARD SPECIFICATION FOR ALUMINUM BRONZE ROD, BAR, AND SHAPES specification establishes the requirements for aluminum bronze rod, bar, and shapes for Copper Alloys UNS Nos. C61300, C61400, C61900, C62300, C62400, C63000, C63020, C63200, C64200, and C64210 NOTE 1 Product intended for hot forging is described in Specification B 124/B 124M. NOTE 2 Warning-Mercury has been designated… Download
ASTM C31
ASTM C31 STANDARD PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS INTHE FIELD Revision Edition 09 Chg: Date: 05/01/09 ASTM C31 Document Abstract This ASTM C31 practice covers procedures for making and curing cylinder and beam specimens from representative samples of fresh concrete for a construction project. The concrete used to make the molded specimens shall be sampled after all on-site adjustments have been made to the mixture proportions, including the addition of mix water and admixtures. ASTM C31, This practice… Download
